1, Undercarriage parts: track roller,carrier roller,sprocket,idler wheel,track link assy.
2, Recoil Spring and  tension cylinder ,u yoke ,excavator track adjuster.
3, H-Link (bucket link)  and  I-link(link rod), track guard.
4, GET :bucket, Cutting edge, End bit,  Bucket teeth,  Bucket adapter, Side cutter.
5, Pin and bushing: track pin and bushing, Bucket bushing and pin,  Bucket ear,Shaft sleeve, bolts and nuts.
6, Hydraulic part: Boom cylinder, Arm cylinder, Bucket cylinder.

Rubber tracks conversion system for trucks

Specification:

• CNC Machined Billet Aluminum
  

• Full bearing setup

• All terrain rubber track conversion system

• Adjustable track tension

• Larger drive wheel for more speed

• Double arms for more realistic setup

• Better scale design

• Engineered by RC4WD UK
  

• Manufactured by RC4WD

• Hex:12mm

Notes:




• This is enough to prep one axle. In order to do a 2 axle truck, you will need two of this item.

• These require a fitting kit to be used for proper mounting and use.

• With only one pair installed on a truck, you will have a gearing change between the normal wheels and the Tracks. If mounting the tracks on the front it will cause push / under steer.

• We recommend the use of these tracks on all corners of the truck for best results.

• Brushless system and higher gearing is suggested, but not required.

• Threadlock is requires on all screws on the tracks before use.




Capable




• Greatly improved traction

• Exceptional floatation with very low ground pressure

• Matches or exceeds wheeled hauling capability

• Maximum performance when pulling implements

• Exclusive technologies for superior performance




Reliable




• Outstanding durability

• Ten years of ATV track system innovation, engineering, and  marketing

• Half-century heritage of molded track manufacturing

• Warranty coverage




Versatile




• Systems for virtually all 4WD ATVs 300cc and up including  side-by-sides and 6-wheelers.




Safe




• Greater vehicle stability

• Remarkable operational control




Easy




• Easy switch from wheels to track systems

• Easy maintenance




	Model:	HKH6-320	Length:	1110mm
	Packing:	Simple/Cardboard Box/Iron Frame	Width:	320mm
			Height:	810mm
	Material:	Alufer	Net Weight:	100KG
	Ground Contact Length:	850mm	Load bearing:	3T
	Sprocket Center Distance to the Ground:		555mm
	Links for Rubber Track:		33
	Applicable Type of Vehicles:		Off-road vehicles/pickup truck/3.0 tons of the following vehicles
	The highest speed limit requirements:		50km/H
	Remarks: a set of includes four separate assembly;The size of the form of three high for a single assembly.		For off-road product, but do not represent can pass any terrain, you like take care of your car, please take care of this product